Skeeter ZXR, FXR, FXE & ZXE Dual Battery Switch Bracket

Skeeter ZXR, FXR, FXE & ZXE Dual Battery Switch Bracket

This Skeeter dual battery switch bracket is designed for Skeeter ZXR (2021–2027), FXR (2020–2026), ZXE (2026–2027), and FXE (2027 model year) bass boats. This double-switch bracket keeps two controls together in the rear battery compartment. Check clearance for both switch bodies, terminal studs, cable bends and the compartment lid.

Compatible Battery Switches

Compatible with Blue Sea Systems m-Series Mini Battery Switches: 6006 (ON/OFF), 6007 (1–2–BOTH–OFF battery selector), and 6011 (Dual Circuit Plus). Select compact rotary ON/OFF battery disconnect switches may also fit. Check housing dimensions and mounting-hole spacing before choosing another brand. Choose a switch with electrical ratings appropriate for your system; bracket fit does not establish electrical suitability.

Dimensions

8.5 inches wide, 4.6 inches deep, 1 inch high; hole spacing is 4 inches

Materials and Product Development

Made from 0.090-inch-thick 5052-H32 aluminum with a matte black powder-coated finish. Designed, engineered, tested and manufactured in the USA by Rocket City Outdoors. Learn about Rocket City Outdoors.

What's Included

Includes one mounting bracket and mounting hardware. Battery switches are NOT included. Switches shown in the photos illustrate installation; battery switches and wiring are sold separately.

Installation Overview

1. Dry-fit the bracket in the intended location and confirm clearance for the compartment lid, nearby equipment and connections.
2. Mark the fastener locations with a marker. Inspect behind the mounting surface, then drill appropriately sized pilot or mounting holes for the supplied fasteners.
3. Clean the mounting surface and secure the bracket using the included hardware.
4. Install both battery switches according to their manufacturers’ instructions. Keep connections or control cables supported and clear of moving parts.

Disconnect electrical power before installation and follow the equipment manufacturer’s wiring and mounting instructions.

See Customer Installations

Visit the Customer Installation Gallery to browse customer-submitted boat photos and installation notes. Look for a comparable boat and mounting surface; photos are a visual reference rather than a guarantee that every boat has the same layout.

Not sure which bracket fits? Email justin@rocketcityoutdoors.com with your boat’s year, make and model, a compartment photo and relevant measurements before ordering.

Shop battery disconnect and cutoff switches.

Frequently Asked Questions

Which Skeeter boats does this bracket fit?

Designed for Skeeter ZXR (2021–2027), FXR (2020–2026), ZXE (2026–2027) and FXE (2027 model year) bass boats. Confirm your rear battery compartment layout and clearance for the switch bodies, terminal studs, cable bends and lid before ordering.

Does this bracket hold one switch or two?

This Skeeter dual battery switch bracket holds two compatible battery switches side by side. Photos showing one installed switch illustrate the mounting position; the bracket has two switch openings.

Which battery switches are compatible?

Fits Blue Sea Systems m-Series Mini battery switches 6006 (ON/OFF), 6007 (1–2–BOTH–OFF) and 6011 (Dual Circuit Plus). For other compact rotary switches, check housing dimensions and mounting-hole spacing. Choose electrical ratings appropriate for your system.

Are mounting hardware and battery switches included?

One mounting bracket and mounting hardware are included. Battery switches are NOT included. Switches shown in photos illustrate installation; switches and wiring are sold separately.

What are the bracket dimensions?

The bracket measures 8.5 inches wide × 4.6 inches deep × 1 inch high, with 4-inch hole spacing. Verify the available compartment space and clearance before ordering.