Universal Bass Boat Battery Switch Mounting Bracket

Universal Bass Boat Battery Switch Mounting Bracket

This universal battery switch mounting bracket holds one compatible battery switch in a non-corner mounting location on bass boats, offshore fishing boats and other marine layouts. The mounting location requires a vertical lip at least 1 inch high. Confirm the available surface and switch clearance; “universal” describes flexible applications, not guaranteed fit on every boat.

Compatible Battery Switches

Compatible with Blue Sea Systems m-Series Mini Battery Switches: 6006 (ON/OFF), 6007 (1–2–BOTH–OFF battery selector), and 6011 (Dual Circuit Plus). Select compact rotary ON/OFF battery disconnect switches may also fit. Check housing dimensions and mounting-hole spacing before choosing another brand. Choose a switch with electrical ratings appropriate for your system; bracket fit does not establish electrical suitability.

Dimensions

5.0 inches wide, 4.3 inches deep, 1.1 inch high

Materials and Product Development

Made from 0.090-inch-thick 5052-H32 aluminum with a matte black powder-coated finish. Designed, engineered, tested and manufactured in the USA by Rocket City Outdoors. Learn about Rocket City Outdoors.

What's Included

Includes one mounting bracket and mounting hardware. Battery switch is NOT included. The switch and wiring are sold separately.

Installation Overview

1. Dry-fit the bracket in the intended location and confirm clearance for the compartment lid, nearby equipment and connections.
2. Mark the fastener locations with a marker. Inspect behind the mounting surface, then drill appropriately sized pilot or mounting holes for the supplied fasteners.
3. Clean the mounting surface and secure the bracket using the included hardware.
4. Install the battery switch according to its manufacturer’s instructions. Keep connections or control cables supported and clear of moving parts.

Disconnect electrical power before installation and follow the equipment manufacturer’s wiring and mounting instructions.

See Customer Installations

Visit the Customer Installation Gallery to browse customer-submitted boat photos and installation notes. Look for a comparable boat and mounting surface; photos are a visual reference rather than a guarantee that every boat has the same layout.

Not sure which bracket fits? Email justin@rocketcityoutdoors.com with your boat’s year, make and model, a compartment photo and relevant measurements before ordering.

Shop battery disconnect and cutoff switches.

Care and Warranty

Clean with soap and water. The bracket includes a limited lifetime warranty against cracks and structural defects under normal use. Warranty claims are subject to review and approval by Rocket City Outdoors. Damage from gross negligence, accidents, collisions, or vehicle wrecks is not covered.

Frequently Asked Questions

How many battery switches does this bracket hold?

This universal battery switch mounting bracket holds one compatible switch. Choose a dual bracket if your installation requires two switches.

Which battery switches are compatible?

Compatible Blue Sea Systems m-Series Mini switches include 6006 (ON/OFF), 6007 (1–2–BOTH–OFF) and 6011 (Dual Circuit Plus). For other compact rotary switches, check housing dimensions and mounting-hole spacing. Select electrical ratings suitable for your system.

Will it fit my boat?

This bracket supports non-corner mounting across boat brands when the mounting surface and clearances are suitable. A vertical mounting lip at least 1 inch high is required. Verify the 5.0-inch width, 4.3-inch depth and 1.1-inch height against your available space before ordering.

Are mounting hardware and the battery switch included?

One mounting bracket and mounting hardware are included. The battery switch is NOT included. Switches shown in installation photos illustrate fitment; the switch and wiring are sold separately.

Where can I see customer installation examples?

Visit the Customer Installation Gallery on the Rocket City Outdoors website for customer-submitted boat photos and installation notes. Use photos as a visual reference and confirm your own measurements and clearance.