Universal Dual Battery Disconnect Switch Mounting Bracket

Universal Dual Battery Disconnect Switch Mounting Bracket

This universal dual battery switch mounting bracket holds two compatible battery disconnect switches side by side in a non-corner location on bass boats, offshore fishing boats and other compatible marine layouts. A vertical mounting lip at least 1 inch high is required. Select the lip orientation that matches your compartment and check space for both switches and their cables.

Compatible Battery Switches

Compatible with Blue Sea Systems m-Series Mini Battery Switches: 6006 (ON/OFF), 6007 (1–2–BOTH–OFF battery selector), and 6011 (Dual Circuit Plus). Select compact rotary ON/OFF battery disconnect switches may also fit. Check housing dimensions and mounting-hole spacing before choosing another brand. Choose a switch with electrical ratings appropriate for your system; bracket fit does not establish electrical suitability.

Dimensions

8.5 inches wide × 3.8 inches deep × 1.1 inches high

Materials and Product Development

Made from 0.090-inch-thick 5052-H32 aluminum with a matte black powder-coated finish. Designed, engineered, tested and manufactured in the USA by Rocket City Outdoors. Learn about Rocket City Outdoors.

What's Included

Includes one mounting bracket and mounting hardware. Battery switches are NOT included. Switches and wiring are sold separately. Mounting guidance and a positioning template are included.

Installation Overview

1. Dry-fit the bracket in the intended location and confirm clearance for the compartment lid, nearby equipment and connections.
2. Mark the fastener locations with a marker. Inspect behind the mounting surface, then drill appropriately sized pilot or mounting holes for the supplied fasteners.
3. Clean the mounting surface and secure the bracket using the included hardware.
4. Install both battery switches according to their manufacturers’ instructions. Keep connections or control cables supported and clear of moving parts.

Disconnect electrical power before installation and follow the equipment manufacturer’s wiring and mounting instructions.

See Customer Installations

Visit the Customer Installation Gallery to browse customer-submitted boat photos and installation notes. Look for a comparable boat and mounting surface; photos are a visual reference rather than a guarantee that every boat has the same layout.

Not sure which bracket fits? Email justin@rocketcityoutdoors.com with your boat’s year, make and model, a compartment photo and relevant measurements before ordering.

Shop battery disconnect and cutoff switches.

Care and Warranty

Clean with soap and water. The bracket includes a limited lifetime warranty against cracks and structural defects under normal use. Warranty claims are subject to Rocket City Outdoors review and approval. Damage from gross negligence, accidents, collisions, or vehicle wrecks is not covered.

Frequently Asked Questions

How many switches does this bracket hold?

This universal dual battery switch mounting bracket holds two compatible battery switches side by side in a non-corner mounting location.

Will this bracket fit my boat?

It supports installations across boat brands where the mounting surface and clearances are suitable. A vertical mounting lip at least 1 inch high is required. The bracket measures 8.5 inches wide × 3.8 inches deep × 1.1 inches high. Allow room for both switches, cables and the compartment lid.

Are mounting hardware and battery switches included?

One mounting bracket, mounting hardware, mounting guidance and a positioning template are included. Battery switches are NOT included. Switches shown in photos illustrate installation; switches and wiring are sold separately.

Which battery switches are compatible?

Compatible Blue Sea Systems m-Series Mini switches include 6006 (ON/OFF), 6007 (1–2–BOTH–OFF) and 6011 (Dual Circuit Plus). For other compact rotary switches, check housing dimensions and mounting-hole spacing. Choose electrical ratings appropriate for your system.

Which lip orientation should I choose?

Choose Lip Up or Lip Down to suit your mounting location and available compartment clearance. The Lip Down option is intended for shallow battery compartments, including some newer Nitro boats. Verify your own measurements and clearance before ordering.